User manual

User Manual
Page 25 of 38
Setting a Static IP on your PC
The WR300N Wireless N Repeater will only give an IP address to your PC upon initial installation. Once you have
associated it with your Wireless Router/AP, you will no longer have access to the device’s web GUI. If you wish to
change any settings on the WR300N, you need to set a Static IP address on your PC. Just remember to set it back
to “Obtain and IP address automatically” after you are done.
To set a static IP address on your PC using Windows XP:
1. Click Start > Control Panel
2. Click on Network and Internet Connections
3. Click on Network Connections