User manual

User Manual
Page 11 of 38
8. Input the current wireless network key/passphrase. Click the Apply button to commit the changes.
9. Close the web browser and power down the WR300N by unplugging the device from the wall plug.
10. Plug the WR300N to a power outlet at the identified location.
11. You may now use your wireless devices such as laptops, smart phones, etc. with the Repeater.
NOTE:
*You may need to reboot your laptop to connect to the WR300N.
**You may need to enable Enhanced Compatibility if you are using Windows 7 OS with certain brands of
Wireless routers.
Use the Device as a Wireless Repeater
Once the wireless connection from the WR300N to the main AP/router is established you can connect your
wireless devices like laptops and smart phones through the wireless repeater. These devices will obtain an IP
address from the main AP/router and should be able to access the Internet from farther locations previously
unreachable by your wireless signal.