Troubleshooting guide


16
6.2.4 Video(Composite/YPbPr/S-Video) Signal OSD Function Table
 Main Menu
REF.#
Submenu Definition
1 Brightness Adjusts the brightness level (range 0-100)
2 Contrast Adjusts the contrast level (range 0-100)
3 Tint Adjust the colour tint. (NTSC only) (range 0-100)
4 Color Adjust the colour density (range 0-100)
5 Color
Temp.
Press (+) or (-) to choose three types of colour temperature 9300°K , 6500°K or
User Colour.
6 Sharpness. Adjust the clarity and focus of the screen image (range 0 - 100)
7 Scan Press (+) or (-) to choose 4 type of over/ under/ full/ 1 : 1 scan
8 OSD
H-Pos.
Adjust the left or right position of the OSD.(range 0-100)
9 OSD
V-Pos.
Adjust the up or down position of the OSD.(range 0-100)
10 Volume Adjust the volume control.
11 PIP/POP Entering PIP/POP submenu.
12 Language Select languages: English, Traditional Chinese, Simplified Chinese, French,
German, Spanish, Italian, Portuguese, Russian and Japanese.
13 Recall Press (+) or (-) recall the default value
 Sub Manu
REF.# Submenu Definition
11.1 PIP/POP View the video input screen image on the left-top/right side
screen
11.2 Sub Source Choose the source of the sub picture: VGA,DVI or YPbPr.
11.3 Size Choose the size of the sub picture
11.4 PIP H-Position Adjust the up or down position of the sub picture
11.5 PIP V-Position Adjust the left or right position of the sub picture
11.6 Swap Switch between main source and sub source