Specifications

OSD

Function

Enters / Exits OSD

5/6

< >

Left Button

Decrease

Button

OSD Off: Pressing < or > can directly

adjust the “volume” and brightness.

OSD On: Use these buttons to adjust

the values of a selected function.

To Manually adjust the image:

1. Display a test pattern image on the monitor. This is the best way to observe

changes as you adjust the image. Alternatively, a stationary image may be

used, preferably one with small text or thin vertical lines.

2. Open the OSD menu by pressing the MENU button on the monitor.

3. Press

< or > to highlight the Image Control menu, then press AUTO.

4. Press

< or > to highlight Clock, then press AUTO to select.

5. Press

< or > adjust, then MENU to exit.

6. Increase or decrease the Clock setting to get the optimum picture. If some

noise or distortion is still visible in the centre section of the test pattern, try

adjusting the Phase option in the Image Control menu.

7. Close the phase submenu by pressing MENU.