Specifications

Setting the Display Resolution

Choosing The Best Resolution

All LCD panels have a native resolution, which is the maximum resolution that

may be displayed on the LCD panel. In the case of the DV226BW the native

resolution is 1680 x 1050 pixels. Lower resolutions can still be displayed at full

screen, however as the lower resolution must be expanded, the quality of the

displayed image is not as good as when the native resolution is displayed.

For best performance from any LCD monitor, you must use the monitor’s native

resolution.

If you are using Windows 2000 or XP, you can change the resolution as follows:

1. Double-click the Display icon in Control Panel.

2. From the Display Properties dialogue box, select the Settings tab.

Set the resolution to 1680 x 1050 using the resolution slider.

3. Click OK to close Display Properties.

If you are using an Apple Macintosh, change the resolution by doing the

following:

MacOS 8.x/9.x

1. Click the Apple icon at the top, left corner of the screen, select Control

Panel and then select Monitors.

2. Select a resolution of 1680 x 1050 pixels with 60Hz refresh rate.

3. If 60Hz is not available, click Recommended in the Show drop-down box