Specifications

11
11
2
Menu
Enter OSD menu.
3
a
Move the selection cursor upwards within the OSD menu.
Press to adjust Contrast if the OSD display is off.
4
b
Move the selection cursor downwards within the OSD menu.
Press to adjust Brightness if the OSD display is off.
6
_
Move the selection cursor to the left within OSD menu.
Enable speaker mute.
7
`
Move the selection cursor to the right within OSD menu.
Volume adjustment.
8
Select/
Auto
Enter submenus or select items within OSD menu.
Automatically adjust the vertical, horizontal position, pixel
phase and pixel clock.
5
Power button
1
Power LED
To manually adjust the image:
1. Display your operating system desktop
2. Open the OSD menu by pressing the Menu button on the monitor.
3. Press a or b to select the Tracking submenu and then press Select.
4. Press a or b to select Clock and then press _ or ` adjust.
5. Check the current setting. Increase or decrease the sampling clock to get
the optimum picture. Look closely at the picture displayed, especially
surrounding text and icons, for any movement or change. Adjust the clock
setting and see how this affects this “noise” or movement. Make sure that
in correcting noise in one part of the screen the setting does not create it in
another. You should with careful adjustment, be able to obtain a picture
with no visible noise in any section of the screen.
6. If some noise or distortion is still visible select Phase and press Select.
7. With the Clock set to the optimal value adjust the Phase to further optimise
the displayed image. You should now be able, with a combination of the
Phase and Clock settings, to obtain a perfectly stable image.