User`s manual

14
Getting Started with Flybook VM
4
Connecting the AC Adapter
1. Connect the AC cable (A) to the AC adapter.
2. Connect the other end of the AC cable (B) to an electri-
cal outlet.
3. Connect the AC adapter (C) to the AC jack on the com-
puter.
The battery charge LED lights.
Powering on the VM for the First Time
For information on turning on the Flybook VM for the first
time, refer to the bundled booklet entitled Windows Start
Here.
(A)
(B)
(C)
Flybook VM_User's Guide_V1.0.book Page 14 Thursday, February 8, 2007 5:46 PM