User`s guide

System Utilities 38
PenMount Utility
PenMount utility is mainly used to calibrate the touch-panel and to check the
positioning of touch-panel. Click [PenMount] icon in Flybook Control Center to start
PenMount utility.
Once the PenMount utility is started, a PenMount Control Panel window appears and
you can operate with the touch operation.
Calibrating the Touch-Panel
Under Calibrate tab, choose standard or advanced calibration procedure to calibrate
the touch-panel.
Follow the steps below to calibrate your touch-panel:
1 Click [
Standard Calibration] to start the standard calibration procedure or 4, 9,
15, or 25 points in selection box of Advanced Mode, and then click [Advanced
Calibration] to initiate the advanced calibration procedure. The target screen
with the first guide-point shown on certain location then becomes whitened.
2 Use the stylus pen to touch the guide points one by one precisely until the last
check point.
3 Touch the last check point to complete the procedure.
Dialogue Flybook V2/V3 Series User’s Guide