User`s guide

Prompt-to-Play User’s Interface 22
Calibrating Touch-Panel
Calibration is the adjustment of the cursor orientation on the screen relating to the
pen tip locality.
Calibrate your touch-panel when:
z Using the touch-panel for the first time.
z The cursor position does not correctly match that of the pen tip.
z Restoring the system image.
To calibrate your touch-panel, see “
PenMount Utility“ section on page 38.
Using Touch-Panel
Touch Mode
There are 2 modes in using touch-panel: general touch mode and Mouse right-click
button mode. Change touch mode for different operational requirements. In general
touch mode, the stylus pen acts as a Mouse left-click button; in Mouse right-click
button mode, the stylus pen acts as exactly.
Changing Touch Mode
To change touch mode:
1 Touch [PenMount] icon in taskbar notification area. A pop-up menu appears.
2 Select
[Right Button] in the pop-up menu to open Touch Mode Selection
window
.
3 Click on the Mouse icon in Touch Mode Selection window to switch the mode.
Dialogue Flybook V2/V3 Series User’s Guide