User's Manual

User manual
Connecting an external display — 19
Connecting an external display
You can connect an external monitor or LCD to your computer with a resolution
up to 1800 x 1440. Check the user manual of the display to be sure it supports
this resolution.
1. With the computer turned off, connect the external display to the VGA con-
nector on the computer.
2. Connect the display to an electrical outlet.
3. Turn on the computer and the external display.
4. Press Fn + F1 to switch output to the external display.
CAUTION: You can permanently damage a display if it does not
support the resolution that your computer is set to. Match the
resolution of the VM to the external display before you attach it
to the computer.