User's Manual
Table Of Contents
- Getting started with the V5 Flybook
- Taking a tour of the V5 Flybook
- Front-left view
- Rear view
- LED descriptions
- Using the battery
- Using the battery lock
- Installing the battery
- Removing the battery
- Charging the battery
- Connecting the AC adapter
- Adjusting display characteristics
- Changing the display orientation
- Changing the display resolution and color
- Changing the display brightness
- Using the swivel screen
- Using the fingerprint reader
- Using V5 Flybook input devices
- Connecting devices
- Using the V5
- Securing your system
- Networking your computer
- Using the built-in Webcam
- Ergonomics
- Caring for your computer
- The BIOS setup utility
- Troubleshooting and specifications
- Index
48 — Networking your computer
Using the 3.5G module
The evolution of cellular communication systems is commonly known by 1G,
2G and 3G designations. 3G is designed for high-speed data transmission
such as VoIP. The 3.5 module enables you to conduct voice communications
with your V5 Flybook.
1. Press Fn+F10 to activate the 3.5G module.
2. Click start | All Programs | Sierra Wireless | 3G Watcher | 3G Watcher
to open the 3G Watcher utility.
Using 3G watcher for voice communications
3G watcher enables you to conveniently set up the 3G module for conducting
voice communications with your favorite VoIP software.
Using the built-in modem
Connect a phone jack to the RJ-11 jack at the rear of the V5 Flybook to use the
built-in modem.