User's Manual
Table Of Contents
- Getting started with the V5 Flybook
- Taking a tour of the V5 Flybook
- Front-left view
- Rear view
- LED descriptions
- Using the battery
- Using the battery lock
- Installing the battery
- Removing the battery
- Charging the battery
- Connecting the AC adapter
- Adjusting display characteristics
- Changing the display orientation
- Changing the display resolution and color
- Changing the display brightness
- Using the swivel screen
- Using the fingerprint reader
- Using V5 Flybook input devices
- Connecting devices
- Using the V5
- Securing your system
- Networking your computer
- Using the built-in Webcam
- Ergonomics
- Caring for your computer
- The BIOS setup utility
- Troubleshooting and specifications
- Index
Using an ExpressCard — 31
Using an ExpressCard
You can use 34 mm-wide and 54 mm-wide ExpressCards with your
V5 Flybook.
Installing an ExpressCard:
1. Press and release the cover to the ExpressCard slot.
The card pops out.
CAUTION:
• Read the user guide that came with your ExpressCard
before installing the card in the computer.
• Do not install or remove an ExpressCard when the com-
puter is in standby or hibernate mode. If you do, when you
try to resume the computer it may not respond.
• Static electricity in your body can damage ExpressCards.
To reduce the static electricity in your body, touch a bare
metal table or a grounded metal object before installing an
ExpressCard.