User's Manual
Table Of Contents
- Getting started with the V5 Flybook
- Taking a tour of the V5 Flybook
- Front-left view
- Rear view
- LED descriptions
- Using the battery
- Using the battery lock
- Installing the battery
- Removing the battery
- Charging the battery
- Connecting the AC adapter
- Adjusting display characteristics
- Changing the display orientation
- Changing the display resolution and color
- Changing the display brightness
- Using the swivel screen
- Using the fingerprint reader
- Using V5 Flybook input devices
- Connecting devices
- Using the V5
- Securing your system
- Networking your computer
- Using the built-in Webcam
- Ergonomics
- Caring for your computer
- The BIOS setup utility
- Troubleshooting and specifications
- Index
Connecting USB devices — 29
Connecting USB devices
There are two Universal Serial Bus (USB) connectors on the V5 Flybook. You
can connect USB devices such as printers or flash drives to either connector.
1. Connect the USB device to one of the USB connectors on the computer.
2. Install drivers for the device as prompted.
CAUTION: Be sure the USB icon on the connector is facing
downwards as shown below. Connecting a USB cable incor-
rectly can damage the connector on the computer.