User's Manual

Troubleshooting

Dialogue Flybook V33i Series User’s Guide

z The power management system might have automatically blanked the screen

to save power, and has gone into video time-out, standby mode, or hibernation

mode. Press any key, move the track-point or Mouse, or push the power button

to turn on the display.

z The angle of the display and the brightness level may not be adequate for the

ambient lighting. Adjust the display angle and press Fn+F1 or Fn+F2 to adjust

the brightness level until you have visibility.

z The LCD screen has a native resolution of 1024 x 600 (XVGA). If you set the

resolution lower than this, the screen expands to fill the display. When the

system can not expand its display to full screen on the LCD screen or on an

external display device, you can right click on Windows desktop and select

[Properties] to open Display Properties window. Then click [Settings] tab and

set the resolution to an appropriate value.

No audio output

z The audio system is closed or the volume of audio system is set too low. Use

hot keys or Flybook Control Center to open the audio system and adjust the

volume.

z The audio output is disabled or set too low in your audio application. Open the

audio output and adjust the volume in your application.

z When an earphone or external speaker is plugged into the earphone/line-out

jack, the built-in speakers will be disabled automatically. If you can not hear

sound from the built-in speakers, ensure that nothing is plugged into the jack.

The keyboard, track-point or Mouse does not work properly

z The system may have entered Suspend to RAM mode. Push the power button

to resume the system.

z An application may have locked out your input device. Restart your system.

z If the keyboard or Mouse does not respond on USB or IEEE 1394 devices,

ensure that the devices are installed properly and that the driver programs are

also installed.

The PC card does not work properly

z The card may not be properly installed. Remove and re-insert the card.

z Your system may not have the correct driver program for the card. Re-install

correct driver program.

z The card may have been installed while the system is busy and the system

was not able to detect the card. Close all applications, restart the computer,

and try to use the PC card again.