User's Manual

48
Changing parts
Dialogue Flybook V33i Series User’s Guide
Installing keyboard back to the computer
83 Put the keyboard down on the top cover, move it forwards until the top side stopped by the lid, and then adjust its location until the flat cable and flat cable connector are aligned.
84 Check and adjust the lock mechanism of flat cable connector. Make sure it is in fully released condition.
85 Insert the flat cable into flat cable connector, make sure it is fully inserted, and then push the lock mechanism with your fingertips to lock it.
86 Hold the keyboard with your two hands, tilt its top side slightly upwards, and then slip it slowly forwards into 3 fix holes in the bottom inner side of keyboard compartment. Place the
keyboard down and gently and evenly click it into 3 latches along the top side with your fingers.