User's Manual

24
Prompt-to-play user’s interface
Dialogue Flybook V33i Series User’s Guide
Outputting display to a VGA display device
8 Connect a VGA display device such as VGA monitor, digital projector to your computer through the VGA output port (D-sub15).
9 Use hot key Fn + ~ (see “Hot keys” section on page 18) or “LCD” icon in Flybook Control Center (see “Flybook Control Center” section on page 34) to output display.
Outputting display to a video display device
10 Connect a video display device such as TV to your computer through the video output port.
11 Use hot key Fn + ~ (see “Hot keys” section on page 18) or “TV” icon in Flybook Control Center (see “Flybook Control Center” section on page 34) to output display.
 When connecting a video display device to your computer, you need a conversion adapter. Find it in your computer’s package.
 Before outputting the display to a video display device, check the device’s input signal type and change your computer’s output signal type to
meet the device’s input need. Your computer can output NTSC or PAL video signal. Change type in BIOS Setup Utility (See page 38). The
default type is NTSC.
Outputting sound or voice to an earphone or external speaker
Connect an earphone or external speaker to your computer through the
earphone/line-out port. The computer automatically switches the output of sound or
voice to the connected device and mutes the built-in speakers.
Inputting sound or voice from an external microphone
Connect an external microphone to your computer through the microphone-in port.
The computer automatically switches the input of sound or voice to the connected
microphone and mutes the built-in microphone.