User's Manual

85
Chapter 5
Chapter 2
Chapter 4
Chapter 1
Appendix
Chapter 3
The touch panel does not work properly
1. If the cursor position dose not correctly match the pen tip position or
the first time use the touch, you must calibrate it.Please refer to
Calibration your touch panel section.
2. Make sure the touch is not pressed by somethings.
The battery can not charge or work time too short
1. Verify the battery is properly installed and is not too hot or too cold.
2. Try to run the Battery Calibration utility.Please refer to System
Recovery Utility Reference Guide.
3. The installed battery is dead or faulty. You must purchase one and
replace it.