User's Manual

84
The GPRS/CDMA module does not work properly
1. Make sure the GPRS/CDMA module is available in your Flybook.
You have apply for a GPRS/CDMA account and get a SIM card
from the network service provider.
2. Make sure the SIM card be inserted into the SIM card slot properly.
3. Make sure the correct software driver be installed and an
initialization command be input in the Extra initialization
commands input box.
The Wireless LAN is unavailable network connection
1. The possible cause of incorrect network name(SSID) or network
key. Make sure you have set the network name(SSID) and network
key to the same values as the access point (infrastructure
connection) or as the computers to be connected with (Ad Hoc
connection).
2. The Flybook be put in poor radio wave condition. You can retry
connection after shortening the distance to the computers to be
connected with (Ad Hoc connection) or to the access point
(infrastructure connection). And You can check the wave condition
in Wireless Network Connection Status window.
3. Check if the power of wireless LAN is turned on. To verify Disable
Radio is not checked in Network setting window.
4. Make sure you have a right of access or Network authentication to
the network to be connected with.
5. You can change channels to avoid active channel duplication.
6. Check the setting of the protocol, work group, shared setting and IP
address.