User's Manual

65
Chapter 4
Chapter 5
Chapter 1
Appendix
Chapter 3
Chapter 2
Wireless communications through the built-in
modules
To start wireless communications through the built-in modules, you
must turn on the power of the modules first and then make connections
through the communication software programs.
You can use hot keys or FlyBook Control Center to turn on and off
the power of modules.
To use hot keys, please see Keyboard section.
NOTE
You can set "Shows icon in notification area when connected"
checked in Local Area Connection Properties window. An Local
Area Connection Status icon will show on the taskbar, and you
can directly click on the icon to invoke the Local Area Connection
Status window.
CAUTION
Using wireless devices in the aircraft is prohibited. Make sure all
your wireless modules are off while you are using FlyBook at
anytime during your flight.
NOTE
For better signal quality and management, we recommend not to
use GPRS/BT/W-LAN at the same time.