User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 296
Dialogic Corporation
Resolved IPY00007472 28620 22 DM/IP Boards Applications should not set the TOS bits through
Dialogic
®
Global Call Software (Parameter =
IPPARM_CONFIG_TOS) or Dialogic
®
IPML Software
(Parameter = PARMCH_TOS). This may cause a blue
screen.
Resolved IPY00006801 33501 22 DM/IP Boards The gc_h3r error entry for failing to retrieve a
presentationRestricted should be changed to a level of
WARNING.
Resolved IPY00006731 31661 22 DM/IP Boards For Dialogic
®
DM/IP Boards, if an error is returned
when attempting to set TOS via Dialogic
®
Global Call
Software, the error message is unclear. Error states:
“Received IPMEV_Error during ipm_setParm on
device ...: No Error.” Setting of TOS field works
correctly. Only in cases where API fails (for any
reason), the error message is not reported correctly.
Resolved IPY00032019 25211 -- DM/V Boards Out-of-Service messages are not sent out on a
Dialogic
®
DM/V960-4T1-PCI Board in NFAS
configuration.
Resolved IPY00016138 27431 -- DM/V Boards Dialogic
®
DM/V Board fails to download if call
progress is set to “y”.
Resolved IPY00016062 28905 -- DM/V Boards Doing a gc_close( ) on the 120th channel using
R2MF, it may occasionally take approximately 8
seconds to go out of and back into service.
Resolved IPY00015557 27160 -- DM/V Boards Using Dialogic
®
DM/V960 (qs_ protocol) Board,
dx_rec( ) does not return immediately after the actual
recording finishes.
Resolved IPY00008962 32275 18 DM/V Boards MAXSIL with CSP on Dialogic
®
DM/V Board is not
working using the CSP stream.
Resolved IPY00007390 31844 18 DM/V Boards ISDN protocols mixed with DPNSS protocol in a single
system will not work if the NetCRV feature is enabled
for DPNSS through the registry setting.
Resolved IPY00014898 26665 -- DM/V480A-2T1 Operator intercept outcomes are falsely detected as
positive answering machine when doing call progress
analysis with Dialogic
®
DM/V480A-2T1 Boards.
Resolved IPY00019232 25922 -- DM/V-A Boards The board type for the media load ml1_pcires.pcd,
ml10_pcires.pcd, ml9b_pcires.pcd are identified as
DM/V1200A-PCI although these are pcd files for
Dialogic
®
DM/V2400A-PCI Boards.
Resolved IPY00016183 28779 -- DM/V-A Boards Channels are not set in service upon setting channel
state when parm 1312 is set to 0 (default) in
ml2_qsa_4ess.config.
Resolved IPY00016180 28553 -- DM/V-A Boards D channel will not recover if line taken out-of-service
and put back in-service when the channel is
connected.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description