User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 109
Dialogic Corporation
Refer to the “Checking TCP Port Availability” section in the Dialogic
®
System Release 6.0
PCI for Windows Software Installation Guide.
1.38 Support for Mixed ISDN and Clear Channel on
Additional Dialogic
®
DM3 Boards
With the Service Update, the ability to mix ISDN (Net5) and clear channel on the same
board on a trunk by trunk basis is now supported on the following boards:
• Dialogic
®
DM/IP601-2E1-PCI IP Boards
• Dialogic
®
DM/N1200-4E1-PCI Digital Telephony Interface Boards
• Dialogic
®
DM/V600-4E1-PCI and DM/V1200-4E1-PCI Voice Boards
With the Service Update, a clear channel media load is now supported on the following
boards:
• Dialogic
®
DM/IP301-1E1-PCI IP Boards
1.38.1 Feature Description
Predefined sets of features for Dialogic
®
Boards are provided in media loads. A media
load consists of a configuration file set (PCD, FCD, and CONFIG files) and the associated
firmware that is downloaded to the board. The new PCD/FCD/CONFIG files for supporting
mixed ISDN and clear channel are:
For a description of the features provided in ML1, ML2, and ML11, see the Dialogic
®
DM3
Architecture PCI Products on Windows
®
Configuration Guide. Note that ML2 supports
only the basic coders on the PSTN side for the DM/IP601-2E1-PCI Board.
Trunks that are configured for clear channel will include 31 bearer channels. The
application should be aware that there will be 31 devices detected on these trunks.
No additional voice channels will be provided to accommodate the additional bearer
channel(s). For example, when in clear channel mode on a DM/IP301-1E1-PCI Board, the
PSTN side of the board will have 31 bearer channels and no signaling channel, but only
30 voice channels.
Board Media Load Filename
DM/IP601-2E1-PCI ML2 ipvs_evr_2isdn_net5_ts16_311.*
DM/N1200-4E1-PCI N/A 4x0_isdn_net5_ts16.*
DM/V600-4E1-PCI ML1 ml1_4x2_net5_ts16.*
DM/V1200-4E1-PCI ML1 ml1_qs_net5_ts16.*
DM/IP301-1E1-PCI ML11 ipvs_evr_ts16_ml11_311.*
Note: DM/IP301-1E1-PCI supports clear channel media load only.