User guide

Dialogic
®
DSI Development Package for Linux - Release Notes Release 6.6.1
8
SNRAI:RAS=,[DPC=,][RC=,][NASP=,][TRMD=,][SNMP=,][LAS=];
3.20 s7_mgt – LAS-Server configuration (IPY00102776)
This release corrects an issue relating to configuration of multiple Local
Application Servers (LAS) connecting to multiple Signaling Gateways.
Previously when each SG was bound to a different LAS the relationship was
not correctly configured for LAS=2 and above.
3.21 s7_mgt - SNLINK command validation
s7_mgt will now detect and reject SNLINK commands which specify the same
host IP address and port information as previously configured SNLINK
commands. Previously this configuration would have been accepted, but was
not valid within SCTP.
3.22 s7_log – Daily rolling logs (IPY00102391)
This release corrects an issue with s7_log when using the –r option (to create
a new log file each day) which prevented new daily log files being created
after the end of a month until the log file size limit was reached. After a new
file was created based on the size limit the daily rolling log would again be
created.
3.23 dsitrace/dsictrl/dsistat – Diameter, IPv6 Support
The dsitrace management tool has been enhanced so that it can be used to
activate tracing for the DMR (Diameter) Module.
The dsictrl management has been updated to allow control of Diameter
Network Contexts, Peers, Applications, Routes and Route Lists.
The dsistat utility has been enhanced to support display of IPv6 addresses.
3.24 MTR – Support for ATI Subscriber State
MTR now includes support for responding to ATI Subscriber State requests.
Dialogic
06-Sep-13
Revised 30-Sep-13