User guide

Dialogic
®
DSI Development Package for Linux - Release Notes Release 6.3.3
40
3.2 Extended License Check delay (IPY00093553)
This release corrects an issue that under some circumstances (in particular on
newer faster machines) resulted in the software license check for all licensed
binaries taking an extended time to complete (eg several minutes).
3.3 Device Drivers under Debian-based distributions
This release corrects a device driver build issue encountered under certain
Debian-based Linux distributions (eg Ubuntu).
3.4 ssdm - Board Failure Under High Traffic Loads
In previous releases, ssdm could exhaust its internal resources when
operated under high traffic conditions. This issue has been resolved.
3.5 s7_mgt - Max links for Diva boards
The s7_mgt limit on the number of signaling links supported on the DIVA
Signaling board has been increased from 4 links to 64 links.
3.6 tempmon – Operation in 64-bit Systems
The tempmon utility, for use with SS7MD boards has been corrected to avoid
falsely returning null temperature values on 64-bit machines.
3.7 gctlib – Potential Core Dump When Using Incorrect
Configurations
This release corrects an issue that could have resulted in a core dump if
either ssd or s7_mgt was run when gctload is not running.
3.8 INAP API - Correction to certain AIN tag values
Three tag values, used for existing AIN services have been corrected as
follows:
Parameter
Affected AIN Services
Previous TAG
Corrected Tag
AINPN_GenericName (551)
AnalyzeRoute
0xa1
0x9f, 0x21
AINPN_TriggerInformation
(24)
InfoAnalyzed, InfoCollected
0x9f, 0x21
0x9f, 0x81, 0x21
AINPN_AMABillingFeature
(65)
AnalyzeRoute, Disconnect,
SendToResource
0x9f, 0x3a
0x9f, 0x58