Specifications

Dialogic
®
DSI SS7MD Network Interface Boards Programmer's Manual Issue 4
95
completion_status
The result of initial configuration. The following table shows the possible values and
their meanings.
Value
Meaning
0
Success
1
Error opening the config.txt protocol configuration file
2
Syntax or value error in the config.txt protocol configuration file
3
Error during configuration (invalid parameters)
4
Error during configuration (no response)
4.7.4 MVD_MSG_LIU_STATUS - LIU Status Indication
Synopsis
Message issued by the board to provide notification of changes in LIU status.
Format
MESSAGE HEADER
Field Name
Meaning
type
MVD_MSG_LIU_STATUS (0x0e01)
id
liu_id (in the range 0 to one less than the number of LIUs)
src
MVD_module_ID
dst
MGMT_module_ID
rsp_req
0
hclass
0
status
liu_status (see below)
err_info
Reserved for future use.
len
0
Description
This message is issued by the board for every change of state on the trunk interface.
The MVD_MSG_LIU_STATUS message header uses the following parameters:
liu_id
The identity of the Line Interface Unit (LIU) to which the status indication applies.