Specifications

4 Message Reference
94
board_type
Set to 16 for SS7MD.
failure_code
Value
Meaning
0x0000
undefined
0x00d7
Thermal failure
4.7.3 API_MSG_CNF_IND - Configuration Completion Status
Indication
Synopsis
Message issued by the s7_mgt protocol configuration utility on completion of initial
configuration sequence.
Format
MESSAGE HEADER
Field Name
Meaning
type
API_MSG_CNF_IND (0x0f09)
id
0
src
0xcf
dst
Notification module (see below)
rsp_req
0
hclass
0
status
completion_status (see below)
err_info
Reserved for future use.
len
0
Description
This message is issued by the s7_mgt protocol configuration utility on completion of the
initial configuration sequence and indicates either success (status=0) or an error
condition that occurred during configuration. The message is only issued when
s7_mgt is run with the –i command line option specifying the module ID of the
Notification Module to which the message should be sent. For example:
s7_mgt –i0x2d
Note: It is recommended that the user invoke this option, then wait for an API_MSG_CNF_IND
message to ensure that the application does not attempt to send messages until initial
configuration is complete.
Parameters
The API_MSG_CNF_IND message header uses the following parameter: