Specifications

4 Message Reference
38
timeslot_mask
Signaling timeslot mask. This field is used to configure HSL links. Bits 0 to 31 of the
mask correspond to timeslots 0 to 31 of the signaling stream identified by the
link_stream parameter. The recommended bits masks values are:
Value
Description
0xfffffffe
structured E1 HSL, 31 slots (1 to 31)
0x01fffffe
structured T1 HSL, 24 slots (1 to 24)
0xfffefffe
structured E1 HSL, 30 slots (1 to 15,17 to 31)
4.2.6 MGT_MSG_L1_END - Layer 1 Configuration End
Synopsis
Message sent to a board to remove an existing layer 1 link that was previously
configured by sending an MGT_MSG_L1_CONFIG message.
Format
MESSAGE HEADER
Field Name
Meaning
type
MGT_MSG_L1_END (0x7f18)
id
0
src
Sending module's module ID
dst
MGMT_module_ID
rsp_req
Used to request a confirmation.
hclass
0
status
0
err_info
0
len
4
PARAMETER AREA
Offset
Size
Name
0
2
Reserved. Must be set to 0.
2
2
l1_resource_id
Parameters
The MGT_MSG_L1_END message includes the following parameters:
l1_resource_id
Layer 1 (logical) resource identifier.