Specifications

Dialogic
®
DSI SS7MD Network Interface Boards Programmer's Manual Issue 4
33
Parameters
The SSD_MSG_BOARD_INFO message includes the following parameters:
board_id
The board_id should be set to the logical board number or alternatively, if geographic
addressing is enabled, to the board’s physical address.
ssdmode
Returns the geographic address mode in which the ssdm module is running. This was
specified at system start-up in the system.txt file, for details refer to Dialogic
®
Distributed Signaling Interface Components - Software Environment Programmer’s
Manual .
The geographic address modes values are:
— 1: PCI address mode
— 2: Serial number address mode
btype
The board type. For DSI SS7MD Boards, this parameter is set to 16.
sernum
The serial number of the board.
cur_temp
Signed 8-bit value containing the current temperature of the board within the range -
128 to 127 degrees Celsius.
max_temp
Signed 8-bit value containing the maximum temperature the board has reached since
SSDM was last started. Value is within the range -128 to 127 degrees Celsius.