Specifications

Dialogic
®
DSI SS7MD Network Interface Boards Programmer's Manual Issue 4
13
Table 2. Dialogic
®
DSI SS7MD Software Licenses
Software License
Code
Link Resources
SW LICENSE, 16 LSL
SS7SBMDM16
16
SW LICENSE, 32 LSL or 1 MTP or ATM HSL
SS7SBMDM32
32
SW LICENSE, 64 LSL, 2 MTP or ATM HSL
SS7SBMDM64
64
SW LICENSE, 128 LSL, 4 MTP or ATM HSL
SS7SBMDM128
128
SW LICENSE, 256 LSL, 8 MTP or ATM HSL
SS7SBMDM256
256
The number of link resources required for each link type is shown below:
Table 3. Link License Resource Requirements
Link Type
Resources Required
LSL (64Kb / 56Kb / 48Kb)
1
Monitored LSL
0.5
HSL (2Mb / 1.5Mb)
32
Monitored HSL
16
ATM (2Mb / 1.5Mb)
32
Monitored ATM
16
Note: IMA bundles are licensed based on the number of ATM cell streams they contain.
2.4.1 Run Modes
The run mode of a board determines the combination of protocols (LSL/HSL/ATM/IMA)
available to use. To change the run mode it is necessary to reset the board.
Table 4. Protocol Run Modes
Value
Run Mode
Protocols Selected to Run on the Board
34
LSL
MTP2 Low Speed Links
35
HSL
MTP2 High Speed Links and/or MTP2 Low Speed Links
36
ATM
ATM links and/or MTP2 High Speed Links and/or MTP2 Low Speed Links
37
IMA
Inverse Multiplexed ATM links
The following combinations of link types are available to the user: