Specifications

4 Message Reference
58
4.2.3 SSD_MSG_BOARD_INFO - Board Information Request
Synopsis
Retrieves information about an SS7HD board.
Format
MESSAGE HEADER
Field Name
Meaning
type
SSD_MSG_BOARD_INFO (0x7689)
id
board_id
src
Sending module ID
dst
SSD_module_ID
rsp_req
Used to request a confirmation.
hclass
0
status
0
err_info
0
len
38
PARAMETER AREA
Offset
Size
Name
0
4
ssdmode
4
2
btype
6
4
addrsw
10
2
numsp
12
4
subsysid
16
20
sernum
36
2
Reserved. Set to 0.
Description
This message is used when a user application wants to obtain information about an
SS7HD board. This can happen at any time after the board has been reported as being
present in the system. Typically, this message is sent by the user application to the
ssdh module upon receipt of the SSD_MSG_STATE_IND (SSDSI_BRD_INS) message.
The ssdh module then responds to the user application with the requested board
information as indicated in the parameters description.
Parameters
The SSD_MSG_BOARD_INFO message includes the following parameters:
board_id
The board_id should be set to the logical board number, or to the board_id received in
the SSD_MSG_STATE_IND message (if geographic addressing is enabled).
ssdmode
Specifies the geographic address mode in which the ssdh module is running. This was
specified at system start-up.
The current geographic address modes values are: