Specifications

Dialogic
®
DSI SS7HD Network Interface Boards Programmer's Manual Issue 11
57
Value
Run Mode
Protocols Selected to Run on the Board
13
TCAP-ISUP
Supports both TCAP and ISUP protocol operation and the appropriate
supporting modules.
22
MAP-ISUP
Supports both MAP and ISUP protocol operation and the appropriate
supporting modules.
23
MAP-TUP
Supports both MAP and TUP protocol operation and the appropriate
supporting modules.
24
MAP-INAP
Supports both MAP and INAP protocol operation and the appropriate
supporting modules.
26
IS41-INAP
Supports both IS41 and INAP protocol operation and the appropriate
supporting modules.
28
MAP-INAP-
ISUP
Supports MAP, INAP and ISUP protocol operation and the appropriate
supporting modules.
Note: It is only possible to activate protocols that have been licensed to run on the board by use
of a suitable license button.
options
- Bit 0 set to 1 to enable SNMP for Board/PCM status
- Other bits reserved for future use, set to 0.
code_file_ext
This parameter contains a string definition of a code file path and name, including a
null terminating character.
If the code_file parameter is set to a null value, the code_file_ext parameter will be
used. If the code_file parameter is set to a value other than null, this will take
precedence and the data in the code_file_ext parameter will be discarded.