Specifications

4 Message Reference
56
code_file
Null terminated string giving the filename of the code file to be downloaded to the
board.
run_mode
The protocols to be run. The following table shows the permitted values and their
meanings.
Value
Run Mode
Protocols Selected to Run on the Board
1
DTI
Digital trunk interface only; no protocol software. This mode does
not require the use of a software license button.
17
MON
Monitoring of MTP2 messages in receive only operation.
2
MTP2
MTP2 protocol operation only.
3
MTP
MTP2 and MTP3 protocol operation.
25
MTP2-L
Same as MTP2, but with larger protocol module dimensioning.
29
MTP-L
Same as MTP, but with larger protocol module dimensioning.
4
ISUP
ISUP protocol operation. Runs supporting MTP3 and MTP2 modules.
6
TUP
TUP protocol operation. Runs supporting MTP3 and MTP2 modules.
10
SCCP-CL
SCCP connectionless (CL) protocol operation. Runs supporting MTP3 and
MTP2 modules.
11
SCCP-CO
SCCP connection-oriented (CO) protocol operation. Runs supporting MTP3
and MTP2 modules.
12
TCAP
TCAP protocol operation. Runs supporting SCCP, MTP3 and MTP2
modules.
5
ISUP-L
Same as ISUP, but with larger protocol module dimensioning.
7
TUP-L
Same as TUP, but with larger protocol module dimensioning.
30
TCAP-L
Same as TCAP, but with larger protocol module dimensioning.
14
MAP
MAP protocol operation. Runs supporting TCAP, SCCP, MTP3 and MTP2
modules.
15
IS41
IS41 protocol operation. Runs supporting TCAP, SCCP, MTP3 and MTP2
modules.
21
INAP
INAP protocol module for IN/AIN operation. Runs supporting TCAP, SCCP,
MTP3 and MTP2 modules.
31
MAP-L
Same as MAP, but with larger protocol module dimensioning.
32
IS41-L
Same as IS41, but with larger protocol module dimensioning.
33
INAP-L
Same as INAP, but with larger protocol module dimensioning.