Specifications

Dialogic
®
DSI SS7HD Network Interface Boards Programmer's Manual Issue 11
29
2.5.2 Run Modes and Protocol Dimensions
The combination of the run mode and board type determines how many SS7 links can
be supported by the board. The SS7HDCQ8 board with four signaling processors can
support twice the number of links of the other boards, which contain two signaling
processors. The number of circuits and dialogs that can be supported by a board
depends only on the run mode and not on the DSI SS7HD board variant.
The MTP protocol module is available for all run modes except DTI, MON, MTP2 and
MTP2-L. The MTP protocol module supports up to 128 Low Speed Links (LSL), 4 High
Speed Links (HSL), 64 link sets and 128 routes.
A summary of the protocol dimensioning supported by V5.07 of the code file is shown
below.
Note: The values in this table are subject to change. Refer to the release notes for the code file
version being used.