Specifications

Dialogic

DSI SS7HD Network Interface Boards Programmer's Manual Issue 11

2.4.5 Visual Indicators

The DSI SS7HDE board (SS7HDPD4TEW) includes the following visual indicators:

• Two LEDs that are integrated into the Ethernet RJ-45 port:

— Ethernet Port Integrity (Green)

— Ethernet Port Activity (Amber)

Note: The 10/100Base-TX Ethernet interface is currently not supported.

• Three general purpose LEDs (CR1, CR2, and CR3)

Note: The general purpose LEDs are not visible when the board is fully installed in a chassis with

the cover on, but are intended for use during development.

2.4.6 Power Requirements

Power requirements are described as follows:

• +12VDC power

1.6A maximum, 1.35A typical

• +3.3VDC power

0.5A maximum, 0.27A typical

2.4.7 Physical Specification

 Form factor

PCIe, x4 lane, standard height, full length

 Dimensions

Board

Length 312 mm (12.283 inches) – excludes ISA Retainer

Height 106.68 mm (4.20 inches)

Packaged

Length 406 mm ( 15.98 inches)

Width 220 mm (8.66 inches)

Height 45 mm (1.77 inches)

 Weight

Board 326 g

Packaged Board 670 g

2.4.8 Environmental Specification

Environmental specification is described as follows:

• Operating temperature range