Specifications

Dialogic

DSI SS7HD Network Interface Boards Programmer's Manual Issue 11

2.4 Dialogic

DSI SS7HDE Network Interface Board - PCI

Express Form Factor Products

The DSI SS7HDE board (SS7HDED4TEQ) is a PCI Express form factor, x4 link width,

standard height, full length board.

Features of the DSI SS7HDE board are described in the following topics:

• Capacity

• Host Interface

• Physical Interfaces

• Protocol Resource Support

• Visual Indicators

• Power Requirements

• Environmental Specification

• Safety, EMC and Telecommunications Specifications

• Reliability

2.4.1 Capacity

The capacity of DSI SS7HDED4TEQ boards is described as follows:

• Digital interfaces

— Four T-1 or E-1 (software selectable)

— High impedance selectable

• SS7 links

Terminate or monitor up to 64 links or up to two HSL links per board

Note: In order to monitor both directions of a signaling link, the user must separately connect

each direction of the signaling link to the receive connection of two different LIUs on the DSI

SS7HD board.

• SS7 protocols

MTP2 on board (16 link and 64 link options), others on host

• TDM bus

H.100 CT Bus compliant with ECTF H.100 CT Bus

• Processors

— Network: Intel 80200 processor

— Signaling: Up to four Intel 80321 I/O processors

2.4.2 Host Interface

DSI SS7HDE boards have a x4 PCI Express connector, and will scale to x4, x2 or x1

lanes via automatic link training. They can also be installed in a x8 or x16 PCI Express

slot.