Specifications

4 Message Reference
118
duration
Duration in tenths of a second since the statistic counters were last reset.
abort_cnt
The number of aborts received on the link.
CRC_errs
Number of CRC errors received on the link.
misaligned_frames
The number of misaligned frames (that is, frames that are not an integer multiple of 8
octets) received on the link.
length_errs
The number of received frames that were designated as either too long or too short for
a configured protocol.
rx_overrun
The number of times that the receiver was forced to discard incoming frames as a
result of there being no internal buffers available to receive the incoming data. This is
a count of the number of events rather than a count of the number of frames
discarded.
receiver_busy_cnt
The number of times the receiver has entered the busy state as a result of the number
of internal buffers falling below a set threshold.
rx_frame_cnt
The number of (error-free) frames received on the link, excluding any duplicate frames
that are discarded as a result of the internal filtering mechanism.
rx_pre_filter_cnt
The total number of (error-free) frames received on the link including any duplicate
frames that are discarded as a result of the internal filtering mechanism.
tx_frame_cnt
The number of frames transmitted on the link excluding any repeated frames that are
generated automatically (for example, repeated FISUs or LSSUs).
rx_pool_cnt
The number of message buffers currently available in the links internal receive pool.
rx_busy_status
Normally set to zero, but in the event of the receiver being in the “busy” state (where
the number of internal buffers falls below a fixed internal threshold), this field is set to
1.