Specifications

Dialogic
®
DSI SS7HD Network Interface Boards Programmer's Manual Issue 11
115
Parameters
The MGT_MSG_R_BRDINFO message includes the following parameters:
board_type
The board type. The following table shows the possible values and their meanings.
Value
Meaning
3
SS7HDP
4
SS7HDC
6
SS7HDE
board_rev
The board revision number.
rtb_type
The Rear Transition Board (RTB) type. Applies to SS7HDC boards only. The following
table shows the possible values and their meanings.
Value
Meaning
0
Not fitted
1
Reserved for future use
2
SS7HDCR8TEW
3
SS7HDCR16TEW
swa
Not applicable to SS7HD boards.
swb
Geographic addressing switch setting, that is, the address at which the board will
appear when the -o3 feature of ssdh is used. See Section Error! Reference source
not found.Error! Reference source not found., “Error! Reference source not
found.Error! Reference source not found.” on page Error! Bookmark not
defined.Error! Bookmark not defined. for more information.
rtb_switch
Not applicable to SS7HD boards.
h110_shelf
The H.110 shelf ID. Applies to SS7HDC boards only.
h110_slot
The H.110 slot ID. Applies to SS7HDC boards only.
prom_maj_rev
Firmware major revision.
prom_min_rev
Firmware minor revision.