Specifications

Dialogic
®
DSI SPCI Network Interface Boards Programmer's Manual Issue 7
71
Value
Mnemonic
Meaning
2
BRDINFO_BTYPE_SPCI
SPCI2S or SPCI4 board
board_rev
The DSI SPCI Board hardware revision number.
swa
The setting of the board's rotary switch labeled "Boot".
Note: The switch should be set to 8.
swb
Geographic addressing switch setting, that is, the address at which the board appears
when the -o3 feature of ssds is used.
prom_maj_rev
Firmware major revision number.
prom_min_rev
Firmware minor revision number.
esn
The board's electronic serial number.
lsn
License serial number. The serial number of the fitted license button.
Status Response
The confirmation message (if requested) indicates success by status of zero.
On error, the following status value can be found in the confirmation message.
Value
Mnemonic
Description
0x01
None
Invalid message length.