Specifications

Dialogic
®
DSI SPCI Network Interface Boards Programmer's Manual Issue 7
57
Parameters
Board Status
Value
Mnemonic
Description
0x60
SSDSI_RESET
Processor successfully reset.
0x62
SSDSI_FAILURE
Failure to reset board.
0x64
SSDSI_BRD_RMVD
Board removed (hot swap only).
0x65
SSDSI_BRD_INS
Board inserted (hot swap only).
0x66
SSDSI_LIC_FAIL
License validation failure.
0x67
SSDSI_LIC_CRP
License corruption.
0x70
SSDSI_BCONG_CLR
Message congestion towards board cleared.
0x71
SSDSI_BCONG_ON
Message congestion towards board occurred.
0x72
SSDSI_DIS_CLR
Message congestion discard towards board cleared.
0x73
SSDSI_DIS_ON
Message congestion discard towards board.
0x74
SSDSI_FAIL
Message congestion - board failure.
4.4.2 API_MSG_CNF_IND - s7_mgt Completion Status Indication
Synopsis
Message issued by s7_mgt on completion of initial configuration sequence.
Format
MESSAGE HEADER
Field Name
Meaning
type
API_MSG_CNF_IND (0x0f09)
id
0
src
0xcf
dst
Notification Module (see below)
rsp_req
0
hclass
0
status
Completion Status (see below)
err_info
Reserved for future use
len
0
Description
This message is issued by s7_mgt on completion of the initial configuration sequence
and indicates either success (status=zero) or an error condition that occurred during
configuration. The message is only issued when s7_mgt is run with the –i command
line option specifying the module_id of the Notification Module to which the message
is sent. For example:
s7_mgt –i0x2d