Specifications

Dialogic
®
DSI SPCI Network Interface Boards Programmer's Manual Issue 7
55
Value
Meaning
0
No change to the interface’s priority.
1 … 32
New priority value for the line interface. The value 1 indicates highest
priority, 32 the lowest priority. If two interfaces are given the same priority,
the lowest-numbered interface is used first.
255
Special value indicating that the line interface must not be used for clock
recovery.
Status Response
The confirmation message (if requested) indicates success by status of zero.
On error, the following status value can be found in the confirmation message.
Value
Mnemonic
Description
0xff
None
Request to configure clock recovery priority order fails.