Specifications

4 Message Reference
24
Description
This message is used during initialization by the application to reset the ssd module
and set up its run-time parameters.
Parameters
mgmt_id
The module_id of the management module, to which ssd sends board status
indications.
num_boards
The maximum number of boards that ssd is required to manage. This must not exceed
16.
Status Response
The confirmation message (if requested) indicates success by status of zero.
On error, the following value can be found in the status message confirmation.
Value
Mnemonic
Description
2
SSD_BAD_PARAM
The SSD Reset Request message was incorrectly formatted.