Specifications

4 Message Reference
22
4.1.2 Board-specific Module IDs
Table 5 lists the software modules IDs (by mnemonic and value) used on the DSI SPCI
Board.
Table 5. DSI SPCI Board Software Module IDs
Mnemonic
Value
Description
MGMT_TASK_ID
0x8e
SPCI Board Management Module
MVD_TASK_ID
0x10
SPCI LIU and Switch Management Module
SS7_TASK_ID
0x71
MTP2 Module
MTP_TASK_ID ‡
0x22
Onboard MTP3 Protocol module
ISUP_TASK_ID ‡
0x23
Onboard ISUP Protocol module
TUP_TASK_ID ‡
0x4a
Onboard TUP Protocol module
NOTES:
1. ‡ The availability of these Module IDs depends on the selected board run_mode. See Section 2.3.1,
Run Modes on page 12 for more information.
4.1.3 Message Status Summary
The following table shows the valid responses when a response request (rsp_req) is
requested in a message.
Table 6. Message Status Responses
Value
Mnemonic
Description
0x00
SDE_MSG_OK
Success
0x01
SDE_BAD_ID
Inappropriate or invalid id in request message
0x02
SDE_BAD_STATE
Message received in wrong state
0x03
SDE_BAD_SIG
Bad signal received
0x04
SDE_UNEX_SIG
Unexpected signal received
0x05
SDE_BAD_MSG
Unsupported message received
0x06
SDE_BAD_PARAM
Invalid parameters contained in message
0x07
SDE_NO_RESOURCES
Insufficient internal message resources
0x08
SDE_INVALID_NC
Invalid Network Context
0x09
SDE_INVALID_VERSION
Message version is invalid
0x0e
SDE_LICENCE_ERR
Failure due to a licensing restriction
0x0f
SDE_INTERNAL_ERR
Failure due to an internal error