Specifications

2 Specification

Supplied with each product and provides a list of the specifications to which the DSI

SPCI board conforms.

• International Declaration of Conformity

See http://www.dialogic.com/declarations

• Country-Specific Approvals

See the Global Product Approvals list at http://www.dialogic.com/declarations

Alternatively, contact your Dialogic technical sales representative for more information.

2.2.10 Reliability

Product reliability is described by:

• MTBF Predication

204,000 hours per Bellcore Method @40ºC

• Warranty

See Dialogic

Telecom Products Warranty Information at

http://www.dialogic.com/warranties

2.3 License Buttons

The ss7.dc3 code file supports different protocol module combinations that are enabled

by fitting the correct license button to the board. Each license button is marked with a

two letter code that is used for identification.

2.3.1 Run Modes

The run_mode parameter in either the SS7_BOARD command or the Board Reset

Request message determines the protocol modules that are started by the code file at

run time. The following table shows the relationship between the license buttons and

the supported run modes.