User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide — September 2007 95
Dialogic Corporation
Parameter Reference
Allowed Values:
• SF = D4 Superframe format (12 consecutive T1 frames) is used.
• ESF = Extended Superframe format (24 consecutive T1 frames) is used.
Default Value = ESF
INI File Parameter Name = t1Framing
3.7.3.5 Selects Transmit Pulse Waveform
Description: Selects the method to be used for generating the Transmit Waveform Shape.
Allowed Values:
• Short Haul 110 ft = The DMG2000 is 0 - 110 feet from T1 line source.
• Short Haul 220 ft = The DMG2000 is 110 - 220 feet from T1 line source.
• Short Haul 330 ft = The DMG2000 is 220 - 330 feet from T1 line source.
• Short Haul 440 ft = The DMG2000 is 330 - 440 feet from T1 line source.
• Short Haul 550 ft = The DMG2000 is 440 - 550 feet from T1 line source.
• Short Haul 660 ft = The DMG2000 is 550 - 660 feet from T1 line source.
Default Value = Short Haul 110 ft
INI File Parameter Name = t1TxWave
3.7.3.6 Outbound TDM Calling Party Source
Description: The source of the calling party that will be provided to the TDM interface for
outbound calls and MWI requests.
Note: When a DMG2000 is connected to a Mitel PBX and is configured for T1 QSIG, this parameter
must be set to one of the following options in conjunction with the Static TDM Calling Party
parameter:
• Outbound TDM Calling Party Source set to Static and Static TDM Calling Party set to a
number (e.g. 1234).
• Outbound TDM Calling Party Source set to Vo IP and the VoIP endpoint must provide a
calling party number in the VoIP call/MWI call request.
• Outbound TDM Calling Party Source set to VoIP_Preferred and Static TDM Calling Party set
to a number (e.g. 1234).
Allowed Values:
• None = No calling party is sent.
• VoIP = Calling party is derived from the VoIP call/mwi-request.
• Static = A statically configured calling party is used.