User`s guide

88 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide — September 2007
Dialogic Corporation
Parameter Reference
3.7.1.3 Interface Side
Description: Identifies the side of the connection.
Allowed Values:
• Terminal = Terminal (user) side of device
• Network = Network side of device
Default Value = Terminal
INI File Parameter Name = t1e1Interface
3.7.2 T1 CAS Protocol Group (T1 CAS Signaling Mode)
The parameters in the T1 CAS Protocol group include the following:
• T1 CAS Protocol
• Line Encoding
• Framing
• Selects Transmit Pulse Waveform
• Flash Hook
• Incoming Rings Before Answer
• Ringing Timeout (msec)
• Ring Cycle Time
• Consult Call Dialtone Drop Code
• Consult Call Proceeding Drop Code
• Consult Call Busy Drop Code
• Consult Call Connected Drop Code
• Consult Call Disconnected Drop Code
• Consult Call Error Drop Code
• MWI Confirmation Tone
• CPID Type
• Initial Wait for Inband CPID (msecs)
• Inband CPID Complete Timeout (msecs)
3.7.2.1 T1 CAS Protocol
Description: If T1 CAS is selected as the Signaling Mode, specifies the T1 CAS protocol to be
used.
Allowed Values:
• Loop Start = Loop Start protocol will be used.