User`s guide

82 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide — September 2007
Dialogic Corporation
Parameter Reference
Allowed Values:
• Yes = Alarms are sent as user-level facility messages.
• No = Alarms are sent to SysLog server.
Default Value = No
INI File Parameter Name = syslogAlarmEnabled
SysLog Minimum Alarm Severity
Description: Defines the minimum alarm severity level that generates notifications to SysLog
server.
Allowed Values:
• Error = Error alarms are sent to the SysLog server.
• Warn = Error and Warning alarms are sent to the SysLog server.
• Info = Error, Warning, and Informational alarms are sent to the SysLog server.
Default Value = No
INI File Parameter Name = syslogAlarmSeverity
Diagnostics Trace to SysLog Enabled
Description: Defines whether diagnostic trace messages are sent to SysLog server.
Allowed Values:
• Yes = Diagnostics trace messages are sent as user-level facility/debug messages.
• No = Diagnostics trace messages are not sent as user-level facility/debug messages.
Default Value = No
INI File Parameter Name = syslogTraceEnabled
3.6.2.8 SNMP Group
The SNMP subgroup includes the following parameters:
• SNMP Traps Enabled?
• SNMP Minimum Alarm Severity
• SNMP Trap IP List
• SNMP Community Name
• SNMP System Name
• SNMP System Contact
• SNMP System Location