User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide — September 2007 69
Dialogic Corporation
Parameter Reference
Call Connect Mode
Description: Specifies when voice path is created between the IP device endpoint and the PBX on
IP-to-PBX calls.
Allowed Values:
• On-Answer = the voice path is not established until the dialed PBX extension answers the call.
• Instant = the voice path is established as soon as the PBX extension is dialed.
Default Value = Instant
INI File Parameter Name = gwCallConnectMode
Send DNIS to VoIP Endpoint
Description: Specifies whether Dialed Number Identification Service (DNIS) received on inbound
TDM call is passed to the VoIP endpoint.
Allowed Values:
• Yes = DNIS is passed to the VoIP endpoint.
• No = DNIS is not passed to the VoIP endpoint.
Default Value = No
INI File Parameter Name = gwSendDnisToVoip
Destination for Un-routable IP Calls
Description: Specifies the IP terminal address to which un-routable IP-To-PBX calls will be
forwarded.
Allowed Values:
• If no H.323 Gatekeeper or SIP Registration Server is used, then any valid IP address may be
specified.
• If there is an H.323 Gatekeeper or SIP Registration Server, then the IP terminal address may be
specified as an alias string name, an e-mail address, or an IP address.
• If blank (none), then un-routable IP-To-PBX calls are rejected.
Note: H.323 is only supported in Version 5.1 SU1 Software or earlier.
Default Value = (no default value)
INI File Parameter Name = gwDefaultIPDest