User`s guide

236 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide — September 2007
Dialogic Corporation
Diagnostics
PIMG>ping 10.0.1.1
10.0.1.1 is alive
PIMG>ping 10.0.1.1 5
PING 10.0.1.1: 56 data bytes
64 bytes from 10.0.1.1: icmp_seq=0. time=2. ms
64 bytes from 10.0.1.1: icmp_seq=1. time=0. ms
64 bytes from 10.0.1.1: icmp_seq=2. time=0. ms
64 bytes from 10.0.1.1: icmp_seq=3. time=0. ms
64 bytes from 10.0.1.1: icmp_seq=4. time=0. ms
----10.0.1.1 PING Statistics----
5 packets transmitted, 5 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/2
PIMG>ping 10.10.10.10
no answer from 10.10.10.10
9.7.4 Ver Command
The Ver command outputs the versions of all hardware and firmware of the unit.
PIMG>ver
Description Version
======================================================================
DSP |9.1| |THU AUG 29 15:22:54 2002|
Flash App |lab_D| |THU NOV 21 16:20:47 2002|
Flash DSP |9.1| |THU AUG 29 15:22:54 2002|
Boot |dhcp| |WED NOV 20 12:48:16 2002|
CPLD 0x21
iNIM App 6.6
iNIM FPGA 179
iNIM Boot 5.0
Base HW 2
9.7.5 Alarm List Command
The Alarm List command outputs the current list of generated system alarms. The timestamp of
each alarm is the time since unit start in hours:minutes:seconds.
PIMG>alarms
000:00:000 System MIB-II Trap: Cold start (0)
000:00:000 System MIB-II Trap: Cold start (0)
000:12:000 Telephony snw (1) - In Service
000:12:000 Telephony snw (1) - In Service
000:12:000 Telephony snw (2) - In Service
000:13:000 Telephony snw (4) - In Service
000:13:000 Telephony snw (5) - In Service
000:13:000 Telephony snw (6) - In Service
000:13:000 Telephony snw (7) - In Service
000:13:000 Telephony snw (8) - In Service
000:15:000 Telephony snw (3) - In Service