User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide — September 2007 181
Dialogic Corporation
8
Unit Status
Status information about the Dialogic
®
1000 Media Gateway (DMG1000) and Dialogic
®
2000
Media Gateway (DMG2000) units can be obtained through the Web interface.
The DMG1000 Status and DMG2000 Status Web pages allow an administrator to view the number
of calls processed by the unit as well as a log of all calls (with call party information). The Media
Gateway supports SNMP Version 1. The Media Gateway-specific SNMP MIB can be downloaded
from the unit using the Web interface. The MIB file dmg.mib can be downloaded from the Media
Gateway Status MIB-II Web sub-page.
Types of information available from the Status menu include:
• Summary Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
• Alarm Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
• Call Log Status Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
• Telephony Status Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
• MIB-II Status Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
• Version Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
• Diagnostics Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
8.1 Summary Information
Selecting Summary from the Status menu displays the following information:
• Device Summary Information:
– The Media Gateway MAC address
– The Media Gateway IP address
– Uptime of the unit
– Device Status
– Ethernet connection losses
– Telephony carrier losses
– GateKeeper ID (if applicable)
• Calls Summary Information:
– Current Calls
– Inbound IP Calls
– IP-to-PBX Calls
– Inbound PBX Calls
– PBX-to-IP Calls
• Serial Protocol Status (Enabled or Disabled)