User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide – September 2007 15
Dialogic Corporation
Revision History
This revision history summarizes the changes made in each published version of this document.
Document No. Publication Date Description of Revisions
64-0260-02 September 2007 Updated to support Version 5.1 SU2 Software.
Added new DMG1004LS model.
Added note to say H.323 is only supported in Version 5.1 SU1 Software or earlier.
Chapter 3, “Parameter Reference” added new parameter in Serial Protocol
Parameters section for MCI Message Type.
Chapter 3, “Parameter Reference” added new parameters in Gateway Advanced
Group section for RTP Source IP Address Validation, RTP Source UDP Port
Validation, SNMP Community Name, SNMP System Name, SNMP System Contact,
SNMP System Location, and Telnet Server Enabled.
Chapter 3, “Parameter Reference” added new parameter in Session Initiation
Protocol (SIP) Parameters section for DNS Translation of Phone Numbers.
Chapter 5, “Dial Plan” added ability to manipulate Redirecting Party in the CPID
(Number) Manipulation section.
64-0260-01 April 2007 Updated to support Version 5.1 SU1 Software.
Global Updates: Changed product names and links from Intel to Dialogic.
The document number and title have been updated with new naming conventions.
The products previously known as Intel NetStructure PBX-IP Media Gateway (PIMG)
and T1/E1-IP Media Gateway (TIMG) are now Dialogic
®
1000 Media Gateway
(DMG1000) and Dialogic
®
2000 Media Gateway (DMG2000). For more product name
changes, refer to New Product Naming Conventions.
Updated notes to say LAN2 is only supported in Version 5.1 SU1 Software or later.
Chapter 3, “Parameter Reference” added new parameters Client IP Address, Client
Subnet Mask, IP Management Interface, Ethernet Interface, Destination Address,
Destination Mask, Gateway Address, Call Progress Filter SNR in dB (DMG2000
Only), and Call Progress Filter Two Tones Max Twist in dB (DMG2000 Only).
Chapter 5, “Dial Plan” added new chapter.
Chapter 8, “Unit Status” added Section 8.5.1, “SNMP Agent”, on page 184,
Section 8.5.2, “Supported MIBs”, on page 185, and Section 8.5.3, “SNMP Alarms”,
on page 187.
Chapter 9, “Diagnostics” added Section 9.1, “VoIP Interface Test”, on page 195,
Section 9.2, “PBX/PSTN Interface Test”, on page 199, and Section 9.3, “PBX Self
Verification Test”, on page 203.
C73213-002
Rev 01
November 2006 Updated to support Version 5.1 Software.
Chapter 1, “Overview” added information about the DMG2120DTI model and added
"Security" section.
Chapter 3, “Parameter Reference” added various new parameters and added
"Security Parameters" section.
Chapter 7, “Data Security” added new chapter.
Removed the PBX configuration chapters from the User’s Guide.
C73213-001
Rev 01
April 2006 Initial version of document to support Version 5.0 Software.