User`s guide

122 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide — September 2007
Dialogic Corporation
Parameter Reference
3.10.2.30 TDM to IP AGC Max Gain (DMG2000 Only)
Description: Defines the PCM to IP AGC maximum gain within the range of 0 to 15 dB.
Allowed Values: 0 to 15 dB
Default Value = 12 dB
INI File Parameter Name = dspPbxToIpAgcMaxGain
3.10.2.31 TDM to IP AGC Min Gain (DMG2000 Only)
Description: Defines the PCM to IP AGC minimum gain within the range of 0 to -15 dB.
Allowed Values: 0 to -15 dB
Default Value = -15 dB
INI File Parameter Name = dspPbxToIpAgcMinGain
3.10.3 T.38 Advanced Settings
3.10.3.1 Allow T.38 ECM Faxes (DMG2000 Only)
Description: Enables/disables Error Correction Mode faxes in T.38.
Allowed Values:
• On = ECM allowed
• Off = ECM disabled
Default Value = On
INI File Parameter Name = dspT38EcmEnable
3.10.3.2 Transmit Small T4 ECM T.38 Packets (DMG2000 Only)
Description: Enables/disables small T4 ECM packet transmission in T.38.
Allowed Values:
• On = Enable small (<256 byte) T4 ECM packet transmission.
• Off = Wait for complete HDLC ECM frame from PCM before processing.
Default Value = On
INI File Parameter Name = dspT38EcmSmallPacketEnable